PEAK 715VL2G
- Цена (USD)
- 724
System Architecture
- Full size SBC with PCI/ISA Golden finger
- AGP 2.0 compliant
- PCI V2.2 compliant
- PICMG 1.0 (Rev.2.0) compliant
- Intel® Pentium® 4 processor with 256K/512K L2 cache on die
- Support 400/533MHz system bus, CPU speed up to 2.4GHz or above
- DDR DIMM x2 support max. memory size up to 2GB (DDR200/266)
- Support single-sided/Double-sided (Does not support double-sided x16 DDR DIMMs)
- Support unbuffered non-ECC DIMMs only
- Award System BIOS
- Plug & Play support
- Advanced power management support
- ACPI 1.0b compliant
- 4M bits flash ROM
- Intel® 845G (GMCH) chipsets
- Pin compatible with future Intel® 845GV/GE chipsets
- Intel® 82801DB x 1 I/O Controller Hub (ICH4)
- Firmware Hub (FWH) 4M bits flash ROM x1
- PCI V2.2 compliant
On Board LAN
- Dual Intel® 82551QM 10/100 ethernet controllers for PEAK715VL2
- Intel® 82551QM controller x1 and Intel® 82540EM gigabit ethernet controller x1 for PEAK715VL2G
- Compliant with PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y, IEEE802.3ab
- WfM 2.0 compliant
- Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT, Netware 5.0, Linux
- RJ45 with LED connector x 2
- Intel® 82845G (GMCH) chipset integrated with Graphics controller
- Hardware motion compensation assist for software MPEG/DVD decode
- 64MB VGA share Memory
- 1.5V AGP interface 4X
- Fully PC 98 and PC 99 Compliant
- 15 pin CRT connector x1
- On board USB port x 2
- Ultra ATA100/66/33 support, 40 pin connector x2
- ITE 8712F-A Super I/O
- SIO x 2, with 2 x 16C550 UARTs, 10-pin header x 2
- PIO x 1, bi-directional, EPP/ECP support, 26-pin connector x 1
- Floppy Disk controller: 34-pin connector x 1
- 6-pin mini DIN connector x 1, for PS/2 keyboard/mouse, 5-pin connector x 1(for external keyboard)
- Optional on-board compact flash socket
- On Board buzzer x 1
- GPIO (4 in 4 out)
- On board 2 pin header for
- On board 2 pin header for reset SW / 2 pin for IDE active LED / 2 pin ATX power SW
- One 3-pin power header for 3 pin power cable connect to backplane board to support ATX Power On function.
- On board 4 pin additional Power Source input
- AC97 output, 10 pin header x 1
- Derived from Super IO ITE 8712F-A to support system monitor.
- 8 voltage (For +1.5V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By)
- One fan speed for CPU; one fan speed for System
- Temperature x2 (one for CPU internal use, another for external system use)
- Soft Power off
- Power On by LAN
- Power On by Keyboard
- Power On by Ring
- On chip RTC with battery back up
- External Li Battery x 1
- Watchdog timeout can be programmable by Software from 1, 2, 4, 8, 16, 32, ....128seconds
- ITE 8888Fx 1 PCI to ISA Bridge
- Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on the backplane ISA Slot.
- 338.58mm(L) x 122mm(W)
Power Requirements
- Voltage Maximum
+5V 10A
+12V 12A
-12V 500mA
Environments
- Operating temperatures: 0°Cto 60°C
- Storage temperatures: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
- CE approval
- FCC Class A
- Парт-номер
- PEAK 715VL2G
- Описание
- Full-Size SBC with Intel 845GV Chipsets, Intel Socket 478 Pentium 4/Celeron CPU with 400/533MHz System Bus up to 2.6GHz+, 32bit/33MHz, Max. 2GB DDR SDRAM Memory support (DDR266)
- Цена (USD)
- 724
- SEO: Ключевые слова
- PEAK 715VL2G
- SEO: Описание
- Full-Size SBC with Intel 845GV Chipsets, Intel Socket 478 Pentium 4/Celeron CPU with 400/533MHz System Bus up to 2.6GHz+, 32bit/33MHz, Max. 2GB DDR SDRAM Memory support (DDR266)